سياسة الخصوصية — ViTiK Pro
آخر تحديث: 23 سبتمبر 2026
تطبيق ViTiK Pro (المشار إليه فيما يلي بـ"التطبيق")
هو أداة احترافية لإدارة مشتركي PPPoE في راوترات MikroTik. تحترم هذه
السياسة خصوصيتك وتوضح بشكل شفاف نوع البيانات التي يتعامل معها التطبيق.
1. طبيعة التطبيق
ViTiK Pro هو تطبيق إداري (B2B) موجّه لمزودي خدمة الإنترنت ومدراء الشبكات.
التطبيق يتصل بخادمك الخاص (Self-hosted) ولا يرسل أي بيانات تجارية إلى
خوادمنا أو إلى أي طرف ثالث.
2. البيانات التي يجمعها التطبيق
أ) بيانات الحساب
- اسم المستخدم وكلمة المرور (تُحفظ محلياً على جهازك فقط).
- رمز الجلسة (Session Token) لمصادقة الطلبات.
- عند استخدام «تبديل الحساب»: رموز جلسات الحسابات التي سجّلت الدخول إليها على هذا الهاتف، محفوظة على الهاتف فقط ولا تُرسل إلى أي مكان. يمكنك إزالة أي حساب من القائمة في أي وقت.
ب) بيانات الراوتر والمشتركين
- عنوان IP الخاص بالراوتر وبيانات API الخاصة به.
- أسماء المستخدمين وأرقام الهواتف للمشتركين (يدخلها مدير الشبكة).
- سجلات الديون والمدفوعات.
- مواقع المشتركين على الخريطة (نقطة وإشارة دالّة اختيارية)، يحددها مدير الشبكة بنفسه لمشتركيه.
تُحفظ هذه البيانات على خادم ViTiK الذي يشغّله مطوّر التطبيق، وتُستخدم فقط
لتشغيل التطبيق لصاحب الحساب. كل حساب يرى بياناته فقط.
هـ) موقع هاتفك
-
يطلب التطبيق إذن الموقع أثناء استخدامه فقط (لا يقرأ الموقع في الخلفية)،
لتحديد موقع المشترك عند منزله، ولعرض الطريق والمسافة من موقعك إلى المشترك.
-
لحساب الطريق يُرسَل موقعك الحالي وموقع المشترك إلى خادمنا، الذي يطلب الطريق
من خدمة الطرق المفتوحة OSRM. لا نحفظ موقعك في حسابك؛ تُحفظ نتيجة الطريق مؤقتاً
لمدة أقصاها 30 دقيقة لتسريع الطلبات المتكررة ثم تُحذف.
-
خرائط الشاشة تُحمَّل من OpenStreetMap وصور الأقمار الصناعية من Esri، وتصلهم
طلبات مربعات الخريطة المعروضة كأي موقع خرائط.
ج) بيانات الإشعارات (Firebase Cloud Messaging)
-
رمز جهاز FCM (Device Token) — لإرسال إشعارات انتهاء الاشتراك
أو تعطّل الأجهزة. لا يحتوي على أي بيانات شخصية.
د) بيانات تقنية
- حالة الاتصال بالشبكة (للكشف عن الاتصال/الفصل).
- تفضيلات التطبيق (الوضع الليلي، اللغة) — محلية فقط.
3. أذونات Android المستخدمة
- INTERNET — للاتصال بـAPI الخادم.
- ACCESS_NETWORK_STATE — لاكتشاف حالة الاتصال.
- POST_NOTIFICATIONS — لعرض إشعارات النظام.
- RECEIVE_BOOT_COMPLETED — لاستعادة الإشعارات المجدولة بعد إعادة التشغيل.
- SCHEDULE_EXACT_ALARM — لتفعيل إشعارات في وقت محدد.
- CAMERA — لتصوير إثبات الدفع عند طلب التفعيل (اختيار صورة موجودة يتم عبر منتقي الصور دون إذن).
- VIBRATE — للاهتزاز عند الإشعارات.
- ACCESS_FINE_LOCATION + ACCESS_COARSE_LOCATION — أثناء الاستخدام فقط، لتحديد موقع المشترك وعرض الطريق إليه.
- CALL_PHONE — لزر «اتصال مباشر» بالمشترك عند الضغط عليه فقط؛ إن رُفض الإذن يُفتح الرقم في شاشة الاتصال.
4. مشاركة البيانات
لا نبيع بياناتك ولا نشاركها لأغراض إعلانية.
تُستخدم البيانات لتشغيل التطبيق فقط. الأطراف التي تصلها بيانات محدودة هي:
Google Firebase (رمز الإشعارات)، وخدمة الطرق OSRM (نقطتا بداية ونهاية الطريق
دون أي اسم أو رقم)، ومزوّدا الخرائط OpenStreetMap وEsri (طلبات مربعات الخريطة).
5. تخزين البيانات
- بياناتك على جهازك: تُحفظ في التخزين الداخلي عبر SharedPreferences.
- بياناتك على الخادم: محفوظة على خادم ViTiK ومعزولة لكل حساب. يمكنك حذف حسابك وكل بياناته من داخل التطبيق (الملف الشخصي ← حذف الحساب).
- عند حذف التطبيق: تُمسح جميع البيانات المحلية تلقائياً.
6. الأمان
- التواصل مع الخادم يجب أن يكون عبر HTTPS (موصى به).
- كلمات مرور MikroTik لا تُرسل إلى Google أو أي طرف ثالث.
- كل البيانات الحساسة محمية بمصادقة Token-based.
7. الإعلانات والتتبع
ViTiK Pro لا يحتوي على أي إعلانات ولا يستخدم أي أداة
تتبع تحليلية (Google Analytics، Firebase Analytics، Facebook SDK، إلخ).
8. الأطفال
التطبيق موجّه للبالغين العاملين في إدارة الشبكات. لا نجمع عمداً أي
بيانات من أشخاص دون 18 سنة.
9. حقوقك
- الحق في الوصول إلى بياناتك (موجودة على خادمك الخاص).
- الحق في الحذف (احذف التطبيق + سجلات الخادم).
- الحق في عدم المشاركة (مفعّل افتراضياً — لا نشارك أي شيء).
10. التعديلات
قد نُحدّث هذه السياسة من وقت لآخر. سيُنشر التحديث على نفس الرابط
وسنُشير إلى التاريخ في أعلى الصفحة.
11. الاتصال بنا
Privacy Policy — ViTiK Pro
Last updated: September 23, 2026
ViTiK Pro ("the App") is a professional
management tool for PPPoE subscribers on MikroTik routers. This
policy respects your privacy and clearly explains what data the
App handles.
1. Nature of the App
ViTiK Pro is a B2B administrative application aimed at internet
service providers and network administrators. The App connects
to your own self-hosted server and does not send any
business data to our servers or any third party.
2. Data Collected by the App
a) Account Data
- Username and password (stored locally on your device only).
- Session token for authenticating API requests.
- With "Switch account": the session tokens of the accounts you signed in to on this phone, kept on the phone only and never sent anywhere. You can remove any account from the list at any time.
b) Router and Subscriber Data
- Router IP address and its API credentials.
- Subscriber usernames and phone numbers (entered by the network administrator).
- Debt and payment records.
- Subscriber locations on the map (a point and an optional landmark), set by the network operator for their own subscribers.
This data is stored on the ViTiK server operated by the App's developer
and is used only to run the App for the account holder. Each account sees
only its own data.
e) Your Phone's Location
-
The App asks for location permission only while in use (it never reads
your location in the background), to pin a subscriber at their home and
to show the route and distance from you to a subscriber.
-
To calculate a route, your current position and the subscriber's position
are sent to our server, which requests the route from the open OSRM routing
service. Your position is not stored in your account; the route result is
cached for at most 30 minutes to speed up repeated requests, then deleted.
-
Map tiles are loaded from OpenStreetMap and satellite imagery from Esri,
which receive the tile requests for the area shown, like any map website.
c) Notification Data (Firebase Cloud Messaging)
-
FCM device token — used to send subscription-expiry and
device-offline notifications. Contains no personal data.
d) Technical Data
- Network connectivity state (to detect online/offline).
- App preferences (dark mode, language) — local only.
3. Android Permissions Used
- INTERNET — to communicate with your API server.
- ACCESS_NETWORK_STATE — to detect connectivity.
- POST_NOTIFICATIONS — to display system notifications.
- RECEIVE_BOOT_COMPLETED — to restore scheduled notifications after reboot.
- SCHEDULE_EXACT_ALARM — to fire notifications at a specific time.
- CAMERA — to photograph a payment proof when requesting activation (choosing an existing photo uses the system photo picker, with no permission).
- VIBRATE — for notification vibration.
- ACCESS_FINE_LOCATION + ACCESS_COARSE_LOCATION — while in use only, to pin a subscriber and show the route to them.
- CALL_PHONE — for the "Call now" button on a subscriber, only when tapped; if refused, the number opens in the dialer instead.
4. Data Sharing
We do not sell your data or share it for advertising.
Data is used only to run the App. The parties that receive limited data
are: Google Firebase (the notification token), the OSRM routing service
(a route's start and end points, with no name or number), and the map
providers OpenStreetMap and Esri (map tile requests).
5. Data Storage
- Data on your device: stored in local SharedPreferences.
- Data on the server: stored on the ViTiK server and kept separate per account. You can delete your account and all of its data inside the App (Profile → Delete account).
- When the App is uninstalled: all local data is automatically erased.
6. Security
- Communication with the server should be over HTTPS (recommended).
- MikroTik passwords are never sent to Google or any third party.
- All sensitive data is protected by token-based authentication.
7. Ads and Tracking
ViTiK Pro contains no ads and uses no
analytics/tracking SDK (no Google Analytics, no Firebase
Analytics, no Facebook SDK, etc.).
8. Children
The App is intended for adults working in network management. We
do not knowingly collect any data from individuals under 18.
9. Your Rights
- Right to access your data (it lives on your own server).
- Right to delete (uninstall the App + clear your server records).
- Right to non-sharing (enabled by default — we share nothing).
10. Changes to This Policy
We may update this policy from time to time. Updates will be
published at the same URL and the date at the top of the page
will be revised accordingly.
11. Contact